Tuesday, June 7, 2016

How to Build A 10 Bowl Puppy Feeder For About $35 Dollars

Cut a 3/4 inch piece of plywood 4 foot by 22 inches.
I got the bowls at Wal-Mart they are the small bowls that have an outside diameter 6 3/4 inches and an inside diameter of 5 1/2 inches that cost about three bucks

Measure 2 inches from the edges and place first bowl, space the bowls 2 1/2 inches.


Place the bowls face down and trace.

Than measure a 1/2 inch all around the first trace and cut out


Use the cut out piece of plywood to trace around the rest of the cut outs.

Use a jig saw to cut the holes out.

Plywood with the bowls installed.


Cut two 2x4s 4 foot and 2 at 19 inches and screw together into a frame. 

Screw the frame to the plywood.

Cut four 6 inch pieces of 2x4 and drill into frame between the first and second hole for feet.

Paint.




Too Cute!

No comments:

Post a Comment